Installing the MVI46-MBP module requires a reasonable working knowledge of
the Rockwell Automation hardware, the MVI46-MBP Module and the application
in which they will be used.

Caution: It is important that those responsible for implementation can complete the

application without exposing personnel, or equipment, to unsafe or inappropriate working
conditions. Safety, quality and experience are key factors in a successful installation.

1.1 System

Requirements

The MVI46-MBP module requires the following minimum hardware and software
components:

Rockwell Automation SLC 5/02 M0/M1 capable processors (or newer), with

compatible power supply and one free slot in the rack, for the MVI46-MBP
module. The module requires 800mA of available power.

Rockwell Automation RSLogix 500 programming software.

Rockwell Automation RSLinx communication software

Pentium® II 500 MHz minimum. Pentium III 733 MHz (or better)

recommended

Supported operating systems:

Microsoft® Windows 98

Windows NT® (version 4 with SP4 or higher)

Windows 2000

Windows XP

32 Mbytes of RAM minimum, 64 Mbytes of RAM recommended

50 Mbytes of free hard disk space (or more based on application

requirements)

16-color VGA graphics adapter, 640 x 480 minimum resolution (256 Color

800

× 600 recommended)

This manual is related to the following products:

MVI56-MBP