ProSoft Technology MVI56E-LDM - Manual (Page 24)

Preparing the MVI56E-LDM Module ControlLogix Platform ♦ "C" Programmable
Developer's Manual Linux Application Development Module
Page 18 of 264 ProSoft Technology, Inc.
March 12, 2014
The file content is shown:
2. Copy inittab.con file to the inittab file.
3. Save the file and reboot the module.
To disable the console...
1. Copy inittab.nocon file to the inittab file.
2. Save the file and reboot the module.
2.7 Establishing Module Communication
Ensure that the module is firmly seated in the rack and that the cables described
in the previous section are secure. Ensure that power is applied.
Note: If you require information on cables and port pinouts, please refer to the
section entitled Cable Connections (page 209) at the end of the manual.
RS-232 Console
If you are connected to Serial Port 1 (P1), establish communications with the
module using the following procedure.
Note: The following procedure uses PUTTY to establish communications. You
can use whatever program you desire.
1. Open Putty