ProSoft Technology MVI56E-LDM - Manual (Page 16)

Preparing the MVI56E-LDM Module ControlLogix Platform ♦ "C" Programmable
Developer's Manual Linux Application Development Module
Page 10 of 264 ProSoft Technology, Inc.
March 12, 2014
2.5.2 Making Configuration Port Connections
You can communicate with the module via RS232 through the Console or
through one of the Ethernet ports using Telnet.
RS-232 Console
You access the Console through Serial Port 1. As a default, the RS-232 Console
port is "enabled". You can "disable" or "enable" this port. Refer to Enabling and
Disabling the Console Port in the next section.
1 Connect the RJ45 end of an RJ45 - DB9m cable (Cable 14) to the Serial Port
1 of the module.
2 Connect one end of the Null Modem Cable (Cable 15) to the DB9m end
Cable 14.
3 Connect the other end of Cable 15 (null modem cable) to your a serial port on
your PC or laptop.