ProSoft Technology MVI56E-LDM - Manual (Page 215)

ControlLogix Platform ♦ "C" Programmable Cable Connections
Linux Application Development Module Developer's Manual
ProSoft Technology, Inc. Page 209 of 264
March 12, 2014
6 Cable Connections
The application ports on the MVI56E-LDM module support RS-232, RS-422, and
RS-485 interfaces. Please inspect the module to ensure that the jumpers are set
correctly to correspond with the type of interface you are using.
Note: When using RS-232 with radio modem applications, some radios or modems require
hardware handshaking (control and monitoring of modem signal lines). Enable this in the
configuration of the module by setting the UseCTS parameter to 1.
6.1 RS-232 Configuration/Debug Port
This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is
included with the module. This port permits a PC-based terminal emulation
program to view configuration and status data in the module and to control the
module. The cable pinout for communications on this port is shown in the
following diagram.