PLANET PL-751 - Manual (Page 25)

User’s Manual of PL-751
25
The lower panel contains a history of all remote devices.
Devices are shown here regardless of whether or not they are on the same logical
network.
„ Device Name
„ MAC
Address
„ Password
„ Rate(Tx/Rx)
„ Network
„ Last
Seen
„ Last Known Network
„ Chipset manufacturer name (Turbo Only devices)
„ Date device last scanned
3.5 Security Button
This section describes how to use Security button for configuration in the following
situations:
„ Establish a new security network (Network AB)
The procedure is as follows:
Step 1
Press and hold the Security button on Bridge A for no more than 10
seconds. Must release after 10 seconds. Once released, the Power light will
flash. The password to Bridge A has just been erased and random security key
has been generated. It must now be linked to your network to adopt the new
network security key.
Step 2
Press and hold the security button on Bridge B for 10 seconds and
release it when the Power light flashes. The password to Bridge B has just been