PLANET PL-751 - Manual (Page 18)

User’s Manual of PL-751
18
Chapter 3: Configuration
3.1 Overview
The PL-751 uses 128-bit AES encryption to block outside access. The key is set by
using the Configuration Utility on the CD. By default, the protection is enabled,
however, it is recommended to change the default network password. All your
Powerline devices must use the same network password in order to be connected
together.
3.2 Main Screen
„ Part 1: Scan a Local Powerline device
Double click the
PowerPacket Utility icon on your desktop and utility screen will
show up as below:
The Main tab shows the Powerline units that are connected to the current computer
and other Powerline devices on the home network, and it will also display Mac
Address of each device.