PLANET IHD-200PR - Manual (Page 52)

HDMI / Video Wall over IP with PoE
IHD-200PT / IHD-200PR
52
A:
Point-to-point and multi-cast is 100 meters. But if the connection via switches,
theoretically, there is no limit distance. It depends on the cable and switch level you
use. (Giga Ethernet switch is recommended or higher level.)
Q9: What’s the maximum of Rx units can be linked via one Tx unit?
A:
Video Wall: 8 x 8.
Video Extender: Theoretically, 1000 are the most, as long as each Rx
unit is assigned to an IP from 65534 IP.
Q10: Why did it fail when updating firmware?
A:
1. If user doesn’t use Safari browser, please download BonjourSDKSetup on PC. (IE
browser is not recommended.)
2. Then choose the right firmware for the right unit (click in the right Web UI).
3. Do not interrupt while updating.
4. User should update every unit. (For example, if there are 3 Rx’s, user should
update for 3 times.)
Q11: I wanted to do Rx individual configuration, but why couldn’t I see all the
Rx’s in the drop-down list?
A:
Please make sure you entered the Web UI of Tx unit.
Q12: How can I connect two or more Tx’s?
A:
User can use HDMI splitter with two or more ports to connect.
Q13: About HDCP issue.
A:
The system will disable the video output signal when it detects non-HDCP compliant
display(s) playing the HDCP video source. All the connected output displays MUST
be HDCP compliant while the video source is HDCP compliant.
Q14: Why is Full HD video source watched on a non Full HD monitor is so
blur or choppy?
A:
We suggest user do not use the low-resolution monitor to watch the higher quality
video source. The screen resolution can only be backward compatible, not forward
compatible. So please adjust the video source resolution appropriate for the output
screen resolution.