Ip setup, Casting mode, 4 function – PLANET IHD-200PR User Manual

Page 37: Video over ip, 3 network

HDMI / Video Wall over IP with PoE

IHD-200PT / IHD-200PR

4.3.1. IP Setup

Auto IP:

Factory default IP.

DHCP:

IP dispatched from DHCP server.

Static:

IP setting by user.

4.3.2. Casting Mode

Multicast: Multicast is a true broadcast. The multicast source relies on multicast-

enabled routers to forward the packets to all client subnets that have
clients listen.

Unicast: Unicast is a one-to-one connection between the client and the server.

Unicast uses IP delivery methods such as Transmission Control Protocol
(TCP) and User Datagram Protocol (UDP), which are session-based
protocols.

4.4 Function

Here user can make settings for IHD-200 PoE series.

4.4.1. Video over IP

Enable Video over IP:

If user unchecks this item, then it can’t work.

Enable Video Wall:

If user unchecks this item, then video wall function can’t be

used; only extender can be used.

4.3 Network

User can set the IP mode of each unit here and also ca

n change the casting mode.