Serial over ip – PLANET IHD-200PR User Manual

Page 38

Text mode
Original mode

HDMI / Video Wall over IP with PoE

IHD-200PT / IHD-200PR

Reset EDID to Default Value:

User can copy the EDID from this Rx to other Rxs

with the same ID. (the same group)

4.4.2. Serial over IP

Enable Serial over IP:

If user unchecks this item, then serial 2 can’t be used.

Operation Mode:
Type 1 and Type 1 guest modes have to do other commands.

Type 2 (extender transmit) and Type 2 guest mode use telnet through port 6752.
(Usually, the API command is for our engineer to use, but not for end users.)

Baudrate Setting:

User can set baudrate here for the unit.