PLANET IHD-200PR - Manual (Page 49)

HDMI / Video Wall over IP with PoE
IHD-200PT / IHD-200PR
49
Q4: Should user use the security DC adapter connector?
A:
No, the normal DC adapter connector is fine, please refer to the photo below.
Both of the two connectors can be plugged in, but the left one can be tightened.
Q5: How can I convert the video source?
A:
There are three ways to convert the video source. One is to use DIP switch, while
the other is to set VLAN port and go with HDMI splitter (matrix).
1. A Tx (transmitter) supports DIP switch for 16 channels, and every time when you
convert the source you have to switch DIP of all units to the same number, and then
reboot all the units.
2. You can set VLAN to convert the video source, please refer to the topology below