PLANET XRT-401D - Manual (Page 47)

42
Client PC Service You can block the clients from accessing some Internet
services by checking the services you want to block.
Protocol
This allows you to select UDP, TCP or both protocol type
you want to block.
Port Range
You can assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
Apply Changes
Click “Apply Changes” to save the setting.
Reset
Click “Reset” to clear all fields.
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)
3.5.2 URL Blocking
You can block access to some Web sites from particular PCs by entering a full URL address or
just keyword of the Web site.
Parameters Description
Enable URL Blocking
Enable/disable URL Blocking
Add URL Keyword
Fill in “URL/Keyword” and then click “Add”. You can
enter the full URL address or the keyword of the web site
you want to block. If you find any typo before adding it
and want to retype again, just click "Reset" and the field
will be cleared.
Remove URL Keyword
If you want to remove some URL keyword from the
"Current URL Blocking Table", select the URL keyword
you want to remove in the table and then click "Delete