PLANET XRT-401D - Manual (Page 46)

41
Add PC
Parameters Description
Client PC Description The description for this client PC rule.
Client PC IP Addresses
Enter the IP address range that you wish to apply this
Access Control rule. This is the user
’s IP address(es)
that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users
’ IP address and the last user’s IP address in the
appropriate boxes. If you want to select only one user
then input the user
’s IP address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.