PLANET XRT-401D - Manual (Page 13)

8
4: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of
Network Protocols and then click the Properties button.
6: Check each of the tabs and verify the following settings:
•
IP Address: Select Obtain an IP address from a DHCP server.
•
DNS: Let all fields are blank.
•
WINS: Let all fields are blank.
•
Routing: Let all fields are blank.
7: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router
’s DHCP server.
?
Note:
Please make sure that XRT-401D ’s DHCP server is the only DHCP server
available on your LAN.
Once you
’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3.