PLANET WSG-500 - Manual (Page 7)

7
4. Installation
The followings are instructions for setting up PLANET WSG-500. Refer to the
illustration and follow the simple steps below to quickly install your Wireless
Subscriber Gateway.
Connecting the Antennas
PLANET WSG-500 provides two antenna connectors on the rear of the unit for
wireless subscribers.
Installation Requirement
Before installing PLANET WSG-500, make sure your network meets the following
requirements.
System Requirements
PLANET WSG-500 requires one of the following types of software:
Windows 95/98/NT/2000/XP l
Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol installed) l
Standard phone line for xDSL modem or coaxial cable for Cable modem for l
Internet access
Web Browser Software l
(Microsoft I.E 4.0 or later version or Netscape Navigator 5.0 or later version) l
One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet card l
UTP network Cable with a RJ-45 connector (Package contents) l
Hint
Mac platform should be OS9 or later in order to have DHCP client
support.