PLANET WSG-500 - Manual (Page 6)

6
INTERNET
Blue
Off
On The WAN is not connected to the internet.
The WAN is connected to the internet.
WES*
Blue
For indicating WES status during WES setup:
Master Slave
WES Start
LED flashing
slowly
LED flashing quickly
WES Negotiate
LED flashing
slowly
LED flashing quickly
WES Fail
(Negotiate
Timeout)
LED OFF LED OFF
WES Success
LED ON for
over 5 seconds
LED ON for over 5
seconds (after Master
displays WES Success)
USB*
Blue N/A For future usage only.
Remark: WES is a future supported feature.
Port Indication
Power Reset WAN LAN 2 LAN 1 Console WES USB
Printed on
Housing
12V/1A Reset WAN (PoE) LAN2 LAN1 Console WES USB
Interface Power Button RJ-45 RJ-45 RJ-45 RS-232 Button USB
Power The power adaptor plugs here.
Reset Used for restarting the system.
WAN
(PoE) One RJ-45 port is used for connecting xDSL or Cable Mode to the
Internet/Intranet.
LAN2
Used for Connecting to the public LAN. It can be chosen to require
authentication to access network resource and the Internet.
LAN1
Used for Connecting to the private LAN. Authentication is not
required to access the network resource from here.
Console Used for configuring the system via Hyper Terminal.
WES* Used for starting WES (WDS Easy Setup) process. For future usage.
USB* For future usage only.