PLANET WSG-500 - Manual (Page 10)

10
6. Configuration of Your WSG-500
Getting Started
The WSG-500 supports web-based configuration. After completing the hardware
installation, WSG-500 can be configured through a PC by using web browser.
To access the web management interface, connect the PC and WSG-500 in advance
via the Private Port of WSG-500. Then, launch the web browser and enter the IP
address of the gateway for that port in the address field then press Enter. Default
IP address of the default gateway of the Private Port is https://192.168.1.254
(Note: https is used for a secured connection).
The administrator login page will appear. Enter default username “admin” & default
password “admin” in the User Name and Password fields. Click Enter to login.
After logging into WSG-500 successfully, a web management interface with a
welcome message will appear.
Click Setup Wizard to help you complete the configuration.
Setup Wizard
Step 1: General
Enter a new password for the admin account and retype it in the verify pass- l
word field (Twenty characters maximum and no spaces allowed).