PLANET FRT-405N - Manual (Page 69)

User Manual of FRT-405N
69
5.7 Fiber/OAM Setting
You can configure fiber setting in this part. It includes Flow Control, Ingress Rate Limit, Egress Rate Limit.
5.7.1 Fiber Configuration
Choose Fiber/OAM Setting > Fiber Configuration, and the following page appears. This function allows
displaying the Fiber port status, Mode, Flow Control and Rate limit. The Link Status in the screen displays the
current connection speed and duplex mode.
Fiber Configuration
Object Description
Link Display the Link situation.
Mode Display the network speed.
Flow Control
Enable or Disable Flow Control function.
 Enable: 802.3x flow control is enabled on Full-Duplex mode or
Half-Duplex mode
 Disable: No flow control function.
Ingress Rate Limit
The value of inbound traffic limitation.
Set the Ingress Rate Limit to No Limit, 512K, 1M, 2M, 4M, 8M, 10M,
50M
Egress Rate Limit
The value of outbound traffic limitation.
Set the Egress Rate Limit to No Limit, 512K, 1M, 2M, 4M, 8M, 10M,
50M