PLANET FRT-405N - Manual (Page 38)

User Manual of FRT-405N
38
5.2.2 LAN
This page allows you to enable or disable networking functions and configure their parameters according to
your practice.
The page includes the following fields:
Object Description
MAC Address
The physical address of the Router, as seen from the LAN. The value
can't be changed.
IP Address
Enter the IP address of your Router or reset it in dotted-decimal
notation (factory default: 192.168.1.1).
Subnet Mask
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
MAC Address MAC address of LAN port (Read-only).
DHCP Type
 Disable: Disable DHCP server on LAN side.
 Server: Enable DHCP server on LAN side.
Start IP Address Fill in the start IP address to allocate a range of IP addresses; client