PLANET FRT-405N - Manual (Page 56)

User Manual of FRT-405N
56
Basic Settings
Object Description
MAC/IP/Port Filtering Enable or disable the MAC/IP/Port filtering function.
Default Policy
The Packet that does not match any rules would be dropped or
accepted.
MAC/IP/Port Filter Settings
Object Description
Source MAC address
Enter the MAC address that matches the source address of the packet
(optional).
Dest IP Address
Enter the IP address that matches the destination address of the
packet (optional).
Source IP Address
Enter the IP address that matches the source address of the packet
(optional).
Protocol There are 4 options, including none, TCP, UDP and ICMP.
Destination Port Range
After setting a valid protocol, you may enter the UPD or TCP
destination port range.
Source Port Range
After setting a valid protocol, you may enter the UPD or TCP source
port range.
Action Select Drop or Accept in the drop down list.
Comment Add description for this rule.
The maximum rule number you can add is 32.
Current MAC/IP/Port Filtering Rules in System
If you want to delete some rules in the table above, select the rules, and then click Delete Selected. Otherwise,
click Reset.