PLANET VIP-254NT - Manual (Page 28)

28
VLAN Settings
This page defines the VLAN setting in this page. This function needs to co-operate with network
devices which have VLAN function.
Field Description
VLAN Packets If setup as “Enable”, it could receive VLAN messages.
VID (802.1Q/TAG) Dispose VLAN ID is add a Tag header after realize enable the VLAN
function. The realized voice packets transfer at the same VLAN. The
prerequisite is it must the same as VLAN of upper switch. The value
range are 2~4094.
User Priority
(802.1P)
To setup the user priority.
CFI To indicate the Canonical Format.
- If CFI=1, it means the header label include RIF field, and the
NCIF flag valus of RIF will to decide the MAC address is
Canonical Format or Non-Canonical Format in frame information.
- If CFI=0, it means the header label does not include RIF field, and
the MAC address is Canonical Format in frame information.