Advance setting to h.323 protocol – PLANET VIP-1680 User Manual
Page 35
Scenario description: Termination call to FXO for one-shoot call
Port 1: FXO was connected to PSTN (area code is 81xxxxxxxx).
H.323 leading number “081x” incoming, and delete the first one digit “0”, and call to PSTN
number.
Note: “081x” will be registered to H.323 Gatekeeper if “Register to GK” was enabled, show as below:
Scenario description: Termination call to FXO
Port 1: FXS
Port 1: FXO was connected to PSTN (area code is 92xxxxxxxx).
Port 1 FXS call to “092x” to PSTN, the FXO port will delete the first one digit “0” and call to PSTN
number.
Note: “092x” will be NOT register to H.323 Gatekeeper when gateway when registering H.323
Gatekeeper mode
Advance Setting to H.323 protocol
In Advanced Setting , VIP-GW provides user three major parts function to configure:
One is “VoIP Advance”, the other one is “Telephone Advance” and “Network Advance”
35