PLANET VGW-400FO - Manual (Page 74)

4-Port SIP Internet Telephony Gateway
VGW-400 Series
74
Matched Length
Matched DNIS (called number) length. To ignore the length,
please set to 0
No Answer Timeout
How long does the hunting continue to next when the called
target doesn’t answer?
Create Route Plan>Primary Route
Item Explanation
Outgoing Type Outgoing call type (FXO or FXS or VOIP)
Hunting Type
The hunting method is used for this route.
z Priority Ring: The call is hunted based on the routing list
order one by one.
z Cyclic Ring: The call is hunted based on the cyclic basis.
This is the recommended method.
z Routing List:
The routing target list is used for this route.
DM Group
Select DM group 1 to 4 in case it requires a DM (for example,
remove the prefix) before making the call
Create Route Plan>Backup Route
Item Explanation
Backup Route Activate the backup route or not
Outgoing Type The backup route outgoing call type
Hunting Type
The hunting method will be used for this route. Please refer to
the Primary Route
Routing List The backup routing target list will be used for this route
Route DM Group
Select DM group 1 to 4 in case the backup requires the DM
before making the call. The DNIS is unchanged by the primary
route DM and same as the DNIS before routing. For example,
the DNIS is 886282265699 and primary DM group removes 886
and use it (DNIS = 282265699) to make a call. When backup
route is started, the DNIS is still unchanged as 886282265699.
This makes the DM easy to predict and implement.
Three special default routes, “VoIP Default Route”, “FXO default Route” and “FXS default Route”, are
used as the default routing when there is no other matched routing. It is not recommended to disable