PLANET VGW-400FO - Manual (Page 71)

4-Port SIP Internet Telephony Gateway
VGW-400 Series
71
Create Route Plan>Primary Route
Item Explanation
Outgoing Type Outgoing call type (FXO or VOIP or FXS)
Hunting Type
The hunting method can be used for this route.
z Priority Ring: The call was hunted based on the routing
list order one by one.
z Cyclic Ring: The call was hunted based on the cyclic
basis. This is the recommended method.
z Routing List:
The routing target list is used for this route.
DM Group
Select DM group 1 to 4 in case it requires a DM route (for
example, remove the prefix) before making the call.
Create Route Plan>Backup Route
Item Explanation
Backup Route Activate the backup route or not.
Outgoing Type Define backup route outgoing call type.
Hunting Type
The hunting method is used for this route. Please refer to the
Primary Route.
Routing List The backup routing target list is used for this route
Route DM Group:
Select DM group 1 to 4 in case the backup requires the DM
before making the call. The DNIS is unchanged by the primary
route DM and the same as the DNIS before routing. For
example, the DNIS is 886282265699 and primary DM group
removes 886 and use it (DNIS = 282265699) to make call.
When backup route is started, the DNIS is still unchanged as
886282265699. This makes the DM easy to predict and
implement.
2 special default routes, “VoIP Default Route” and “FXS Default Route”, are used as the default routing
when there is no other matched routing. It is not recommended to disable these 2 default routes. The
FXS default route is used as FXS outgoing call’s default route. VoIP default route is used as VoIP
incoming call’s default routing.