PLANET VGW-400FO - Manual (Page 28)

4-Port SIP Internet Telephony Gateway
VGW-400 Series
3.5 Debug Setting
The VGW-400 series provides the real-time debug to syslog or through telnet interface. It generates the
debug information based on debug level and modules. Since the generating debug will consume
system resources, it is recommended to turn on only when necessary and under Planet FAE’s
instruction.
Item Explanation
Syslog Enable or disable to send system information to syslog server or not
Check for Start
anytime
Always send syslog or only during a specified time range.
Syslog Start
(YYYY/MM/DD
HH:MM)
Always send syslog or only during a specified time range.
Syslog Stop
(YYYY / MM / DD
HH:MM)
The syslog stop sending time
Syslog Server Syslog server IP address
Syslog Port Syslog server service port (default is 514)
DSP Debug Enable or disable to send DSP information to capture log
DSP Capture
Server
syslog capture server IP address
DSP Capture Port syslog capture server service port (default is 50000)
28