PLANET IPX-2000 - Manual (Page 38)

PLANET IPX-2000 user’s manual
38 of 51
password must be used for both.
The Terminal Management page allows the administrator to configure trunk terminals used by IP
PBX. Select Trunk -> Trunk terminal and one can add, edit, and delete terminals. IP PBX
service must be reloaded to activate changes.
3.15.1 Add Trunk Terminal
• Click button from the left panel.
• Enter settings shown in Table 4-8.
• Click Save button.
The newly added terminal shall be displayed in Terminals panel on the left side.
3.15.2 Edit Trunk Terminal
• Click the link of the terminal to edit from the Terminals panel.
• Edit settings shown on the right side.
• Click Save button.
3.15.3 Delete Trunk Terminal
• Click the link of the terminal to delete from the Terminals panel.
• Click Delete button.
The deleted terminal shall disappear from the Terminals panel.
Table 4-8 Trunk Terminal Configuration Settings
Field
Description
Terminal identifier A unique number consisting of digits only.
This is the trunk identifier configured on the
other IP PBX.
Description Arbitrary description info.