PLANET NVR-420 - Manual (Page 9)

1.5 Front / Rear Panel
1.6 LEDs Definition
LEDs Color Description
Green When NVR-420 is fully started
Red When NVR-420 is off, but power cord remains plugged in.
Amber
Blinking during system initialization, reboot, and firmware
upgrade Power
Off When NVR-420 is off and the power cord is not plugged in.
Green Disk is online.
Red Disk error.
Amber
Solid amber when NVR-420 is recording.
Blinking amber when the disk is recycling. HDD1/2
Off No disk or disk is offline.
Green
Solid green when NVR-420 is online.
Blinking during event triggered.
Channel 1~4
Off Disconnect or no camera is configured.
1.7 Connectors
Connector Description
USB Connect your USB flash disk for firmware upgrade and backup.
Reset Press and hold reset button for 30 seconds to factory default.
HDMI HDMI output
Ethernet 10/100 Mbps network.
English
9
9
4-CH H.264 Network Video Recorder with HDMI
User’s Manual of NVR-420
4-CH H.264 Network Video Recorder with HDMI
User’s Manual of NVR-420