PLANET NVR-1620 - Manual (Page 14)

14
3. Remove the screws on the left and right side of the HDD tray.
HDD
Tray
4. Insert the HDD in the HDD tray. Please push the HDD until the SATA connection
is connected properly, and lock the HDD screw on the left and right side.
HDD
5. If there is a second HDD, please repeat step 4 to install it.
Note
1. The NVR supports SATA I or SATA II hard disks
2. The NVR supports max. 3TB per hard disk and it supports total
of 2 hard disks (6TB)
6. Place the top housing back and secure it with the bottom housing.