PLANET NVR-1620 - Manual (Page 12)

12
Network
Amber Solid amber for activity on a 1Gbps network
Green Solid green for activity on a 10/100Mbps network
Status
Amber Blinking during firmware upgrade
Green
Shows solid green for normal operation
Blinking green when firmware upgrade is done
Red Flashes red for failed firmware upgrade
Alarm
Red Blinking when an alarm occurs
None When alarm is reset
Camera
Green Solid green, live connected with no event or recording activity
Amber Blinking amber, manual or event recording is being performed
Amber
Solid amber, schedule or continuous recording is being
performed
Red Recording is set but no video from camera
Button Description
Reset
Press once to reset this device.
Press over 10 seconds to reset to default settings.
Power Press to start or shut down.
Buzzer Press to on/off buzzer.
Connector Description
USB Connect your USB flash disk for firmware upgrade and backup.
Rear panel