2 ptz setting – PLANET ICA-H312 User Manual

Page 47

3.6.2 PTZ Setting

Camera Protocol:

This device can connect to a PTZ camera or speed dome camera

and controls them thru RS485 interface.

Camera Address:

This is the camera ID set in PTZ camera or speed dome camera.

Note

that please DO NOT changes the default value if unnecessary. If so,

user needs to check and set value properly for both sides.

Baud rate:

This is the communication speed between network module and P/T

scanner.

NOTE: If need to change these parameters, user needs to check and set value properly for

both, network module and P/T scanner