PLANET ICA-H312 - Manual (Page 41)

RTSP Port: Choose the RTSP port. The RTSP protocol allows a connecting client to start
a video stream. Enter the RTSP port number to use. The default value is
554.
RTP Port: Specify the range of transmission port number of video stream. The default
range is 50000 to 50999. User can specify a number between 1024 and
65535.
NOTE: 1. To use the 3GPP function, in addition to previous section, you might
need more information or configuration to make this function work.
2. To use the 3GPP function, it strongly recommends installing the
Networked Device with a public and fixed IP address without any firewall
protection.
3. Port 554 is the default for RTSP service. However, sometimes, some
service providers change this port number for some reasons. If so, user
needs to change this port accordingly.
Dialing procedure:
1. Choose a verified player (PacketVideo, Quicktime or Realplayer currently)
2. Use the following URL to access: rtsp://host/mpeg4/media.3gp
Where host is the host name or IP address of the camera.
Compatible 3G mobile phone:
Please contact your dealer to get the approved list of compatible 3G phone.
3.5.5 UPnP
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Network Camera. If your operating system is UPnP enabled, the device will automatically
be detected and a new icon will be added to “My Network Places.” If you do not want to use the
UPnP functionality, it can be disabled
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available from
the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to
an external HTTP port in the NAT router will be forwarded to the device.
41