PLANET WRT-416 - Manual (Page 31)

Chapter 7 Application & Gaming
7.1 Virtual Service
Use the Virtual Server function when you want different servers/clients in your LAN to handle different
service/Internet application type (e.g. Email, FTP, Web server etc.) from the Internet. Computers use
numbers called port numbers to recognize a particular service/Internet application type. The Virtual Server
allows you to re-direct a particular service port number (from the Internet/WAN Port) to a particular LAN
private IP address and its service port number. (See Glossary for an explanation on Port number)
z
Enable Virtual Service
Enable Virtual Service
z IP Address
This is the LAN client/host IP address that the Public Port number packet will be sent to.
Note: You need to give your LAN PC clients a fixed/static IP address for Virtual Server to work properly.
z Protocol
Select the port number protocol type (TCP, UDP or both). If you are unsure, then leave it to the default
both protocols.
z Port Range
This is the port number (of the above Private IP host) that the below Public Port number will be changed
to when the packet enters your LAN (to the LAN Server/Client IP)
z Comment
The description of this setting