PLANET WRT-416 - Manual (Page 15)

z Time Zone Select
Select the time zone of the country you are currently in. The router will set its time based on your selection.
z NTP Server Address
You can manually assign time server address if the default time server dose not works.
4.2.3 LAN
The LAN Port screen below allows you to specify a private IP address for your router’s LAN ports as well as a
subnet mask for your LAN segment.
z IP Address
This is the router’s LAN port IP address (Your LAN clients default gateway IP address)，the default is
192.168.1.1.
z Subnet Mask
Specify a Subnet Mask for your LAN segment, the default is 255.255.255.0