PLANET WPG-130N - Manual (Page 38)

PLANET 802.11n Wireless Presentation Gateway
WPG-130N
- - 38
5.3.2 Network Setup
This page is used to configure the parameters for the local area network which connects to the wireless
interface. Here you may change the setting for IP address, subnet mask, DHCP server, etc..
 IP Setup
Figure 5-6
The page includes the flowing detail fields:
Object Description
IP Setup
Obtain IP address
automatically
If you select this option, the WPG-130N will detect the network
environment automatically.
 When WPG-130N is connected to a LAN that has DHCP
server, the clients of WPG-130N will be assigned an IP
by that server and the built-in DHCP server of
WPG-130N will be disabled.
 When the WPG-130N is connected to a LAN that does
not have any DHCP server, the built-in DHCP server of
WPG-130N will be enabled and the clients of WPG-130N
will obtain IP address by itself.
Or you can select this option to use the fixed IP address for
WPG-130N. (Default Settings)
IP Address The default value is 192.168.1.1
Subnet Mask The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
Use the following IP
address
DNS Server The default value is 192.168.1.1