PLANET WPG-130N - Manual (Page 14)

PLANET 802.11n Wireless Presentation Gateway
WPG-130N
- - 14
Step 2. When the projector shows the default screen as below, it indicates WPG-130N is ready now.
Figure 2-4 Projector Default Screen
If the screen is out of range, please turn off the projector or monitor first. Then turn
on the projector or monitor again to reset the configuration.
Step 3. User your laptop or desktop to site survey the wireless signal of WPG-130N, and connect your PC
with it wirelessly. The default SSID is WPG-130N.
Figure 2-5 Windows 7 Platform Wireless Site Survey