PLANET WNRT-633 - Manual (Page 60)

User’s Manual of WNRT-633
-53-
will use the Ad-hoc mode to operate.
Default is “Infrastructure”.
Note: only while the wireless mode is set to “Client”, then the Network
Type can be configured.
SSID The ID of the wireless network. User can access the wireless network
through it only. However, if you switch to Client Mode, this field
becomes the SSID of the AP you want to connect with.
Default: WNRT-633
Broadcast SSID If you enable “Broadcast SSID”, every wireless station located within
the coverage of the WNRT-633 can discover its signal easily. If you are
building a public wireless network, enabling this feature is
recommended. In private network, disabling “Broadcast SSID” can
provide better wireless network security.
Default is “Enabled”.
Data Rate Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically, it’s not necessary to change this value
unless you know what will happen after modification.
Default is “Auto”.
Enable Mac Clone
(Single Ethernet Client) Enable Mac Clone.
 WDS
Connect this Wireless Router with up to 8 WDS-capable wireless routers to expand the scope of
network.