PLANET WNRT-633 - Manual (Page 33)

User’s Manual of WNRT-633
-26-
The page includes the following fields:
Object Description
IP Address Enter the IP address of your Router.
Factory default:
192.168.1.1
Subnet Mask An address code that determines the size of the network.
Normally use
255.255.255.0 as the subnet mask.
Step 4 WAN Interface Setting
The Wireless Router supports five access modes in the WAN side. Please choose the correct mode
according to your ISP Service.
Mode 1 - DHCP Client
Figure 5-1-5 Setup Wizard – WAN Interface Setup screenshot
Select DHCP Client to obtain IP Address information automatically from your ISP.
Mode 2 Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will
need to enter the IP address, subnet mask, gateway address, and DNS address provided to you by
your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four
octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.