PLANET WNRT-633 - Manual (Page 23)

User’s Manual of WNRT-633
-16-
Figure 4-1-4 Obtain an IP address automatically
4.1.2 Configure the IP address manually
Summary:
 Set up the TCP/IP Protocol for your PC.
 Configure the network parameters. The IP address is 192.168.1.xxx ("xxx" is any number
from 2 to 254), Subnet Mask is 255.255.255.0 , and Gateway is 192.168.1.1 (The Router's
default IP address)
If you are sure the DHCP server of WNRT-633 is disabled (the default setting of AP Mode and Client
Mode ), you can configure the IP address manually. The IP address of your PC should be
192.168.1.xxx (the same subnet of the IP address of WNRT-633, and "xxx" is any number from 2 to
254), Subnet Mask is 255.255.255.0, and the Gateway is 192.168.1.1 (The default IP address of
WNRT-633)
1) Continue the settings from the last figure, select Use the following IP address radio button.
2) If the LAN IP address of the WNRT-633 is 192.168.1.1, enter IP address 192.168.1.x (x is from 2
to 254), and Subnet mask 255.255.255.0.
3) Enter the LAN IP address of the WNRT-633 (the default IP is 192.168.1.1) into the Default
gateway field.