PLANET WNRT-625 - Manual (Page 35)

Virtual Server Settings
Virtual Server Settings: Enable or disable this function. After selecting Enable, you can set the
following parameters.
IP Address: Enter the virtual server IP address in internal network.
Port Range: Set the port range of virtual server.
Protocol: There are 3 options, including none, TCP& UDP, TCP, and UDP.
Comment: Add description for this rule.
The maximal rule number you can add is 32.
Click Apply to make the configuration take effect. Click Reset to cancel the new configuration.
5.3 DMZ
This page allows you to set a De-militarized Zone (DMZ) to separate internal network and Internet.
DMZ Settings: Enable or disable this function. After selecting Enable, you can set the DMZ IP
address.
DMZ IP Address: Enter the DMZ host IP address.
Click Apply to make the configuration take effect. Click Reset to cancel the new configuration.
35