PLANET WNRT-625 - Manual (Page 19)

2. If you select Dynamic in the Address Mode field, the page shown in the following figure appears.
L2TP Mode
Server IP: Address of L2TP server.
User Name: The user name of L2TP account.
Password: The password of L2TP account.
IP Address: IP address of WAN port.
Subnet Mask: Subnet mask of WAN port.
Default Gateway: The default gate way of WAN port.
Operation Mode: It provides two types of operation modes.
Keep Alive means keeping on-line mode. You can set the redial period in the field. When the
redial period expires, AP will execute dial-up again to keep online.
On Demand means executing dial-up on demand. Within the preset idle time, if AP does not
detect the flow of the user continuously, AP automatically stops the PPPOE connection.
Once it detects the flow (e.g., accessing a webpage), the router restarts the PPPOE dial-up.
MAC Clone
Enabled: Enable or disable.
After finishing setting, click Apply to save the settings and make the new configuration take effect.
Click Cancel to close without saving.
19