PLANET WNRT-625 - Manual (Page 18)

PPPoE Mode
User Name: User name of PPPoE account
Password: Password of PPPoE account
Verify Password: Enter the password of PPPoE account again.
Operation Mode: It provides two types of operation modes.
Keep Alive means keeping on-line mode. You can set the redial period in the field. When the
redial period expires, AP will execute dial-up again to keep online.
On Demand means executing dial-up on demand. Within the preset idle time, if AP does not
detect the flow of the user continuously, AP automatically stops the PPPOE connection.
Once it detects the flow (e.g., accessing a webpage), the router restarts the PPPOE dial-up.
MAC Clone
Enabled: Enable or disable.
After finishing setting, click Apply to save the settings and make the new configuration take effect.
Click Cancel to close without saving.
¾ L2TP
Select L2TP in the WAN Connection Type drop-down list and the following page appears. There are
two address modes: Static and Dynamic.
1. If you select Static in the Address Mode field, the page shown in the following figure appears.
18