PLANET WNAP-6306 - Manual (Page 24)

User’s Manual of WNAP-6306
Chapter 4. Software Installation
4.1 Software Configuration
There are web based management and configuration functions allowing you to have the jobs done
easily. The WNAP-6306 is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address: 192.168.1.1
Default IP subnet mask: 255.255.255.0
WEB login User Name: admin
WEB login Password: admin
4.2 Connecting the AP
For OS of Microsoft Windows 2000/ XP:
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window
will appear.
2. Move mouse and double-click the right button on Network and Dial-up Connections icon.
Move mouse and double-click the Local Area Connection icon. The Local Area Connection
window will appear. Click Properties button in the Local Area Connection window.
Figure 4-1
3. Check the installed list of Network Components. If TCP/IP is not installed, click the Add
button to install it; otherwise go to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
- 24 -