Appendix a: configuring the pcs – PLANET WIPG-300H User Manual

Page 72

PLANET 802.11n Wireless Interactive Presentation Gateway

WIPG-300H

Appendix A: Configuring the PCs

In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make

sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.

1. Install TCP/IP component

1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2) Click

the

Network and Internet Connections icon, and then click on the Network Connections

tab in the appearing window.

3) Right-click the icon shown below and select Properties on the prompt page.

Figure A-1

4) On the prompt page shown below, double-click on the Internet Protocol (TCP/IP).