PLANET WIPG-300H - Manual (Page 17)

PLANET 802.11n Wireless Interactive Presentation Gateway
WIPG-300H
Step 3. Click the button to start projection
Figure 3-3 WIPG Utility – Control Panel
3.2. Control Panel
Figure 3-4 WIPG Utility – Control Panel Function Introduction
Button Description Button Description
Start Full Screen Projection
Project to Split No. 4
Project to Split No. 1 Stop projecting
Project to Split No. 2 Freeze The Projection Screen
Project to Split No. 3 Enable the Magnifier function
Please refer to the following sections for detailed instructions of the menu.
3.2.1. Show Receiver Information
Click “Show Receiver Information” and it will display the Receiver Information, such as Wi-Fi Name, IP
Address and code on the upper of desktop. It will close automatically after 30 seconds.
17