2 configure the ip address manually, Configure the ip address manually – PLANET WDRT-731U User Manual
Page 22
User Manual of WDRT-731U
-16-
2. Setting IP address automatically
Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the
Figure below:
Figure 4-3
Now click OK to save your settings.
4.1.2 Configure the IP Address Manually
Summary:
Set up the TCP/IP Protocol for your PC.
Configure the network parameters. The IP address is
192.168.1.xxx
("xxx" is any number from 2 to
254), Subnet Mask is
255.255.255.0
, and Gateway is
192.168.1.1
(The Router's default IP address)
1
Select Use the following IP address radio button.
2
If the Router's LAN IP address is 192.168.1.1, enter IP address 192.168.1.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
3
Enter the Router’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4
Select Use the following DNS server addresses radio button. In the Preferred DNS Server field, you can
enter the DNS server IP address which has been provided by your ISP