PLANET WDRT-731U - Manual (Page 105)

User Manual of WDRT-731U
-99-
Figure 5-7-1
The page includes the following fields:
Object Description
 Enable IPTV: Check/uncheck to enable/disable the IPTV feature.
 Enable IPTV STB
Port:
Check/uncheck to enable/disable the IPTV-specific port.
Note:
1. If you enabled both options mentioned above, then note below:
(a). Set IPTV connection type to DHCP/dynamic IP or static IP if the set-top box is connected to any LAN
port from 1-3.
(b). Select the dial mode provided by your ISP if the set-top box is connected to the IPTV-specific port.
IMPORTANT
Note that the IP address of the set-top-box or smart TV should be on the same IP
net segment as router’s WAN IP.
2. After the IPTV port is set for IPTV purpose, PC that connects to such port will not be able to obtain an IP
address or access Internet. So think twice before you start. Plus, LAN ports1-3 can only be used to connect
PCs instead of an IPTV set-top box.
3. The IPTV feature does not support wireless access.