PLANET WDL-U600AC - Manual (Page 44)

802.11ac Dual Band Wireless USB Adapte r
5.1.1 Configuration
We recommend that you connect to the wireless signal first, in order to avoid possible IP
conflict. Please follow the steps in Chapter 3 CONNECTING TO WIRELESS NETWORK
to first make connections to your desired SSID and wireless signal.
After connecting to the wireless signal, click on the AP button from the menu bar and the
following window will pop out. On the AP Configuration page, you can choose some basic
configurations, such as wireless network name, and security setting.
Click Apply to start broadcast the SSID.
You should be seeing two active networks as shown below. The SoftAP is the
WDL-U600AC broadcast.
44