PLANET WDL-U600AC - Manual (Page 22)

802.11ac Dual Band Wireless USB Adapte r
WDL‐U600AC
Network security option (“Authentication” and “Encryption”) will be selected
automatically based on the security setting of the wireless access point you
selected. It’s not necessary to change these settings by your own self.
Step 5. Click “Right arrow” button, and you’ll see the connection has been added to the profile and
then you can connect to the wireless network successfully.
Step 6. Wireless adapter will attempt to connect to access point; this may require few seconds to
minutes. When the SSID and IP address are displayed in the main window, your computer is
connected to access point you selected. Click “Close” icon to close configuration window.
If you are connected to an access point but the connection drops, please
check security settings and re-check password spelling.
3.2 Windows Zero Configuration
Windows XP / Vista / 7 have a built-in wireless network configuration utility called “Windows Zero
Configuration” (WZC). You can also use WZC to configure your wireless network parameter:
Step 1. Right-click PLANET Wireless Utility icon, and click “Use Zero Configuration as
Configuration Utility”.
22