PLANET WAP-6100 - Manual (Page 6)

Chapter 1 Introduction
The WAP-6100 is an outdoor 802.11g CPE AP with 12dBi antenna built in. This manual describes the
details of how to manage this equipment.
1.1 Package Contents
Make sure that you have the following items:
•
One WAP-6100
•
One Power Cord
•
One PoE Injector
•
One Metal Ring
•
One 25m CAT5 Cable with RJ-45 plug and ODU connector
•
One 1.9m CAT5 Cable with RJ-45 plugs
•
One User’s Manual and Utility CD
•
One Quick Installation Guide
Note:
If any of the above items are missing, contact your supplier as soon as
possible.
1.2 Features
‧ Wireless LAN IEEE802.11b/g compliant
‧ Solid housing provides protection against rigorous weather conditions
‧ Four operating modes support: AP, Wireless Bridge, Wireless Client, and Repeater
‧ Strong network security with 64/128/152-bit WEP encryption, WPA and WPA-PSK
‧ Built-in 12dBi patch antenna
‧ 5 levels of adjustable transmit power control
‧ Super G mode raises the data rate up to 108Mbps
‧ Support DHCP Client
‧ Provides “Connection Status” indication for Repeater and Client modes
‧ Power over Ethernet design