PLANET VIP-281SW - Manual (Page 20)

PPTP Set LAN interface as PPTP/L2TP mode.
Set IP type if Dynamic IP or Static IP at PPTP/L2TP connection. Mode
Default : Dynamic IP
WAN IP Address of the Router at Static IP type. IP Address
Default : 0.0.0.0
WAN Mask of the Router at Static IP type. Subnet Mask
Default : 0.0.0.0
Gateway of the Router Gateway
Default : 0.0.0.0
Set PPTP/L2TP Server IP address. Server IP Address
Default : 0.0.0.0
Set user name of PPTP/L2TP connection User Name
Default : Null
Set password of PPTP/L2TP connection Password
Default : Null
- 20 -
Í
Note
for the WAN environment setting. If the “Connect Type” is
“PPPoE”, the Utility Tool can NOT find the device.
Please be noticed that the Utility Tool is only designed