PLANET VIP-281SW - Manual (Page 11)

- 11 -
#198# Factory Reset None
The system will be reset to
factory default value and
reboot automatically.
Following keypad commands can be used to display the network settings enabled on Router via voice
prompt.
IVR Menu Choice Machine operation Notes
#120# Check LAN port IP Address
IVR will announce the current IP address of
the LAN port.
#126# Check WAN port IP Address
IVR will announce the current IP address of
the WAN port.
#121# Check network connection Type
IVR will announce if DHCP in enabled or
disabled. (WAN port)
#122# Check the Phone Number
IVR will announce current enabled VoIP
number. (WAN port)
#123# Check Network Mask
IVR will announce the current network mask
of the Router. (WAN port)
#124# Check Gateway IP Address
IVR will announce the current gateway IP
address of the Router. (WAN port)
#125# Check DNS Server Setting
IVR will announce the current setting in the
DNS field. (WAN port)
#128# Check Firmware Version
IVR will announce the version of the
firmware running on the Router.
Following keypad commands can be used to set up the main function .
IVR Menu Choice Machine operation Parameter(s) Notes
#130+first
priority codec
Set First Priority Codec
01: G.711 u-Law, 02:
G.711 a-Law, 03: G.729,
04: G.723 6.3K, 05:
G.723 5.3K, 06: G.726
16K, 07: G.726 24K, 08:
G.726 32K, 09: G.726
40K, 10: GSM-FR, 11:
G.722
You can set the codec you
want to the first priority.
For example: #13001#
Set G.711 u-Law to the first
priority codec
#133# Set Speaker Voice Gain 00~31, 32: Mute
For example: #13305#
Mic Voice: 5
#134# Set Mic Voice Gain 00~31, 32: Mute
For example: #13410#
Mic Voice: 10
#138# Enable call waiting None Enable Call waiting